2020. 1. 31. 04:23ㆍ카테고리 없음
- Sony Nex-c3k/s Image Data Converter Ver.4.2.02 For Mac Os
- Sony Image Data Converter Windows 10
- Sony Image Data Converter Download
Thank you for your continued interest in Sony products. Sony is offering a firmware upgrade for Interchangeable Lens Digital Camera NEX-5N. Improvements after firmware upgrade. Applies automatic compensation to SELP1650.
The Sony support site states. With Image Data Converter ver.4.2.02 you can: Display RAW data. Adjust the brightness or color. Develop output to a JPEG or TIFF format.
Updates RAW data format version.After this update, distortion correction of RAW data will be available with Image Data Converter Ver.4.2 or later. The latest version of Image Data Converter is available on the following site. Adds bracket shooting exposure settings (three frames / 1.0EV, 2.0EV, 3.0EV). Makes SELP1650 retract immediately after turning off the camera.
Improves autofocus operation stability Improvements from previous version:. Enhancement of AF response: - When subject distance changes enormously. Improved stability in certain camera operations: - When setting Lens Compensation: Distortion to Auto and Picture Effect to Miniature at the same time. When setting Exposure Compensation, Intelligent AF operation improves. How to check the firmware version. Select Menu → Setup → Version on the camera.
The firmware version is displayed. If your firmware version is Ver. 1.02 or later, the upgrade is not required. System Requirements Supported OS. Windows 10. Windows 8.1. Windows 8.
Windows 7 SP1. Windows Vista. SP2.
Windows XP. SP3. Starter edition is not supported. 64-bit and Starter editions are not supported. Other system requirements.
Hard disk space: 200MB or more. RAM: 512MB or more. Please close all other application software before upgrading the firmware. Other Items. USB cable supplied with the camera Note: Update functionality is not guaranteed with any other USB cable. Power source for the camera Fully charged rechargeable battery pack NP-FW50 or AC adaptor AC-PW20 (sold separately) Note: The upgrade can be performed only when the remaining battery level is (three marks) or more.
We recommend that you use a fully charged battery or the AC adaptor AC-PW20 (sold separately). Details IMPORTANT:. When performing the firmware upgrade, please use a fully charged rechargeable battery pack NP-FW50 or the AC adaptor AC-PW20 (sold separately). Do not remove the battery or AC adaptor during the upgrade; otherwise, the camera may become inoperable due to the sudden power shutdown. Remove the memory card from the camera beforehand.
When using an A-mount lens with the LA-EA2 Mount Adaptor (sold separately) and setting to use the AF Micro Adj. Function, the registered value is reset Start Firmware Updater.
Close all currently running programs on your computer. Double-click UpdateNEX5nV102.exe to start up Firmware Updater. Check the USB connection mode Select Menu → Setup → USB Connection on the camera, and confirm Mass Storage is selected.
If the mode other than Mass Storage is selected, please select Mass Storage. Connect the camera to the computer with the supplied USB cable. Note: When the camera is connected to the computer, the LCD screen of the camera turns off. Please proceed to the next step.
If the computer cannot find the camera, the message “ Could not find the camera for this update.” appears on the computer display. Try the following if this happens.
Disconnect the USB cable and connect it again. If the computer has multiple USB terminals, try with the other terminals. (Your computer may have some USB terminals on the backside.). Confirm is displayed on the task tray at the lower right corner of the computer screen. Note: If the icon is not displayed on the task tray, please proceed to the next step. After confirming the above, click Next on Firmware Updater.
The screen below appears on Firmware Updater. Camera’s LCD screen Note: From this step onwards, never turn off the camera until the firmware upgrade is completed. After confirming the screens on the above steps, click Next. The current version and the version after the upgrade appear on the lower left part of the screen. Upgrade is required If the screen below appears, the upgrade is not required. According to the message, stop the USB connection and click Finish.
Turn off the camera, remove the battery pack or the AC adaptor, and then turn on the camera again. Upgrade is not required. Click on the task tray at the lower right corner of the computer screen to stop the USB connection. Notes: - Please keep the USB cable connected even after stopping the USB connection on the computer with the above operation. If the icon is not displayed on the task tray, please proceed to the next step. Press the center of the control wheel to reset the camera.
Camera’s LCD screen Camera control wheel Note: The screen turns off when the center of the control wheel is pressed. Please proceed to the next step. Click Next on Firmware Updater. After resetting, reconnection of the camera is verified, and the screen below appears. Click Run to start the upgrade. The progress bar appears while upgrading (approximately 5 minutes).
Note: Never turn off the camera nor disconnect the USB cable while upgrading. When the upgrade is completed, the screen below appears. Click Finish and disconnect the USB cable.
Click on the task tray at the lower right corner of the computer screen to stop the USB connection. Note: If the icon is not displayed on the task tray, please proceed to the next step. Disonnect the USB cable. Turn off the camera, remove the battery pack or the AC adaptor, and then turn on the camera again. Check the firmware version. Select Menu → Setup → Version on the camera.
The firmware version is displayed. The firmware upgrade was completed successfully if Ver. 1.02 is displayed.
Thank you for your continued interest in Sony products. Sony is offering a firmware upgrade for Interchangeable Lens Digital Camera NEX-5N. Improvements after firmware upgrade. Applies automatic compensation to SELP1650. Updates RAW data format version.After this update, distortion correction of RAW data will be available with Image Data Converter Ver.4.2 or later. The latest version of Image Data Converter is available on the following site.
Sony Nex-c3k/s Image Data Converter Ver.4.2.02 For Mac Os
Adds bracket shooting exposure settings (three frames / 1.0EV, 2.0EV, 3.0EV). Makes SELP1650 retract immediately after turning off the camera. Improves autofocus operation stability Improvements from previous version:.
Enhancement of AF response: - When subject distance changes enormously. Improved stability in certain camera operations: - When setting Lens Compensation: Distortion to Auto and Picture Effect to Miniature at the same time.
When setting Exposure Compensation, Intelligent AF operation improves. How to check the firmware version. Select Menu → Setup → Version on the camera.
The firmware version is displayed. If your firmware version is Ver 1.02 or later, the upgrade is not required. System Requirements Supported OS.
Mac OS X v.10.5 – 10.11 Other system requirements. CPU: Intel processor. Core Solo and Core Duo processors are no longer supported. Hard disk space: 200MB or more. RAM: 512MB or more. Please close all other application software before upgrading the firmware. Other Items.
USB cable supplied with the camera Note: Update functionality is not guaranteed with any other USB cable. Power source for the camera Fully charged rechargeable battery pack NP-FW50 or AC adaptor AC-PW20 (sold separately) Note: The upgrade can be performed only when the remaining battery level is (three marks) or more. We recommend that you use a fully charged battery or the AC adaptor AC-PW20 (sold separately).
Details IMPORTANT:. When performing the firmware upgrade, please use a fully charged rechargeable battery pack NP-FW50 or the AC adaptor AC-PW20 (sold separately). Do not remove the battery or AC adaptor during the upgrade; otherwise, the camera may become inoperable due to the sudden power shutdown. Remove the memory card from the camera beforehand.
Sony Image Data Converter Windows 10
When using an A-mount lens with the LA-EA2 Mount Adaptor (sold separately) and setting to use the AF Micro Adj. Function, the registered value is reset. Start Firmware Updater. Do not connect the camera yet at this point. Double-click UpdateNEX5nV102.dmg to start up Firmware Updater.
Double-click the UpdateNEX5nV102 icon which appears on the Desktop. Double-click the FirmwareUpdater icon. To load a kernel extension, the message prompts you to allow the application to make changes. Type the password for the administrative account. Firmware Updater starts up. Check the USB connection mode Select Menu → Setup → USB Connection on the camera, and confirm Mass Storage is selected.
Connect the camera to the computer with the supplied USB cable. Note: When the camera is connected to the computer, the LCD screen of the camera turns off. Please proceed to the next step. If the LCD screen of the camera dose not turn off, please try the following methods. Disconnect the USB cable from the camera, then reconnect the USB cable. If there are another USB terminal with the computer, reconnect the USB cable to another USB terminal.
Click Next on Firmware Updater. The screen below appears on Firmware Updater Camera’s LCD screen Note: From this step onwards, never turn off the camera until the firmware upgrade is completed.
After confirming the screens above, click Next. The current version and the version after the upgrade appear on the lower left part of the screen. Upgrade is required Note: If Current version is Ver. 1.02, the upgrade is not required. According to the message, stop the USB connection and click Finish.
Turn off the camera, remove the battery pack or the AC adaptor, and then turn on the camera again. Upgrade is not required. Press the center of the control wheel to reset the camera. Camera’s LCD screen Figure 10: Camera control wheel Note: The screen turns off when the center of the control wheel is pressed. Please proceed to the next step. Click Next on Firmware Updater. After resetting, reconnection of the camera is verified, and the screen below appears.
Sony Image Data Converter Download
Click Run to start the upgrade. The progress bar appears while upgrading (approximately 5 minutes). Note: Never turn off the camera nor disconnect the USB cable while upgrading. When the upgrade is completed, the screen below appears. Click Finish and disconnect the USB cable.
Turn off the camera, remove the battery pack or the AC adaptor, and then turn on the camera again. Check the firmware version. Select Menu → Setup → Version on the camera. The firmware version is displayed.
The firmware upgrade was completed successfully if Ver. 1.02 is displayed.